Software
Network Version Geiger Stand Data Cables

 

Home
Pocket Models
Probe Models
Compare Models
Software

GeigerGraph Software

Our selection of Geiger Counters, namely the Inspector, the Inspector EXP, the Radalert/Digilert, the Monitor 4, and the PRM-8000/9000 come with an optional GeigerGraph software for a Windows PC.

Each pulse or count from the Geiger Counter is transmitted through a data cable, and via the software, displays and graphs those counts per minute in terms of the Current reading, an Average, and Minimum and Maximum counts per minute (CPM) over the test period.

The GeigerGraph software is especially useful for monitoring environmental radiation, alerting you to any elevated levels relative to your typical background count.  The software issues an audible and visual alert whenever the CPM exceed a user set desired level.  For example, the picture above shows the program first monitoring background radiation, but then halfway through the test period, issuing a visual alert because some radioactive "event" caused the radiation counts to exceed the user set Alert Level.

Features:

bullet

As a full Windows program, GeigerGraph can optionally run in the background while you multi-task, notifying you only when your pre-determined Alert Level is exceeded by actual radiation counts.

bullet

Pleasing interface, including and easy to understand running total and summary of Radiation Count dataattractive 3D graphing, a flashing LED with each radiation count, and handy speed buttons.

bullet

Identify your monitoring station and associated data records, including graphs and spreadsheets, by the Person Monitoring, Location, Altitude, Geiger Counter Model, etc.

bullet

The count data for each minute is recorded on an Internal Spreadsheet, and you can make notes for each of those minutes for analysis that you may be conducting.

bullet

You can configure the program so that a Radiation Alert executes a computer program.

bullet

The program also saves the radiation count data every minute to a text file that can be exported to an external spreadsheet program such as Excel or Lotus 123 for further analysis.

bullet

GeigerGraph also incorporates a simulation designed to mimic the recording and graphing of radiation counts in the instance where you have no compatible digital Geiger counter plugged into your computer to produce "real" pulses.  The simulation demonstrates the graphing of background radiation, followed by an alertable and elevated radiation count from a theoretical radioactive "event".

bullet

The optional data cable has a 3.5mm stereo plug on one end which plugs into the Geiger Counter's dual miniature jack.  The output at the tip of the plug provides a positive 5 volt pulse each time the Geiger counter detects a count.

bullet

The opposite end of the data cable is a standard USB-A connector.

bullet

Software is issued by Download.

bullet

Software is a Windows program which can run on any PC with Windows XP or later.

Compatible Geiger Counters:

bullet

All Inspector and Inspector EXP models

bullet

Radalert, Radalert 50, and Radalert 100

bullet

Digilert 50, Digilert 100, and Digilert 200

bullet

palmRAD

bullet

CRM-100

bullet

Monitor 4 - year 2007 re-design

bullet

The Geiger

bullet

Images SI models

bullet

PRM-7000, PRM-8000, and PRM-9000

bullet

Onyx

bullet

Even CDV-700's (through the headphone jack with adaptation)

bullet

Potentially other models that offer Pulse Output through Data Port or Audio Out

Minimum System Requirements for Standard Version of GeigerGraph Software:

bullet

Windows XP, Vista, 7, 8

bullet

Pentium Processor or later

bullet

Available USB port

bullet

1GB RAM recommended

bullet

20MB Hard Drive Space

Order the Standard Version of GeigerGraph below, or click here for GeigerGraph for Networks, a more powerful version which gives one access to the wildly popular Radiation Network.

This product typically ships within 1 business day.  The software itself is distributed by Download.  Instructions for Download will be sent by separate email after your order is processed.

Here is a Shopping Cart button for both the Software, and including the Data Cable.

Qty: SKU: SC5 Std   Price: $59  

And below is a Shopping Cart button for just the Software only, excluding the data cable.  The software itself is distributed by Download.  Instructions for Download will be sent by separate email after your order is processed.  (Note: Checkout will incorrectly charge shipping, but we will not assess it.)

Qty: SKU: SC5 Std WOC   Price: $49  

And if you need it, below is a Shopping Cart button for just the Custom USB Data Cable.

 

 

 

Qty: SKU: DC3   Price: $29  

 

Back to the overview of Geiger Counter Models