WipeTest

 

Home
Specifications
Xtreme Boot
WipeTest
Software
Inspector EXP
An optional Wipe Test Plate is available for the Inspector, shown in the picture at left.  This stainless steel plate is designed to slide easily onto the back of the Inspector, positioning its circular depression for placement of a wipe directly in front of and parallel to the detector window at a fixed distance of 1 centimeter.  The circular depression will accommodate wipes up to 1.75" in diameter.

The idea behind this accessory is to set up a controlled environment for timed measurements, typically, to reveal low level radiation that a momentary scan might miss, and the particular logistical setup offers repeatable conditions for successive tests.

The Wipe Test Plate is removable for general surveying or for decontamination.  Fits in carrying case with Inspector.

This product typically ships within 1 business day.

As of February 2012, this accessory has been redesigned, so there are now two versions.  If you are fitting for an old Inspector model, or for the Inspector Alert by International Medcom, or for the Inspector+ model by S.E. International up through Serial Number 30327, then choose SKU WTPA below:

Qty: SKU: WTPA   Price: $45


Otherwise, if you are fitting the Wipe Test Plate for an Inspector+ model with Serial Number 30328 or higher, then choose SKU WTPIN below:
 

Qty: SKU: WTPIN   Price: $45

In any case, if you are ordering a new Inspector with this Wipe Test Plate, we will be sure to include the compatible version.

Back to the Inspector

WipeTest